- 209
- 3 237 798
Marcus Dunn
Приєднався 19 жов 2007
Program a ATtiny Using an Arduino
Easy step by step guide to how to program an ATtiny using an Arduino.
I've also completed a step by step guide on my Instructables page which has all of info you need including, parts used, how to make the developer board, wiring diagram etc.
Instructable
www.instructables.com/How-to-Program-a-ATtiny-With-Arduino/
Additional Board Manager URL (to be pasted into preferences):
raw.githubusercontent.com/sleemanj/optiboot/master/dists/package_gogo_diy_attiny_index.json
Blink Script:
//We will replace "LED_BUILTIN" with "4" since ATtiny does not have a built-in led!
void setup() {
// initialize digital Pin 3 of ATtiny 13(defined in hardware as 4) as an output.
pinMode(4, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(4, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(4, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
I've also completed a step by step guide on my Instructables page which has all of info you need including, parts used, how to make the developer board, wiring diagram etc.
Instructable
www.instructables.com/How-to-Program-a-ATtiny-With-Arduino/
Additional Board Manager URL (to be pasted into preferences):
raw.githubusercontent.com/sleemanj/optiboot/master/dists/package_gogo_diy_attiny_index.json
Blink Script:
//We will replace "LED_BUILTIN" with "4" since ATtiny does not have a built-in led!
void setup() {
// initialize digital Pin 3 of ATtiny 13(defined in hardware as 4) as an output.
pinMode(4, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(4, HIGH); // turn the LED on (HIGH is the voltage level)
delay(1000); // wait for a second
digitalWrite(4, LOW); // turn the LED off by making the voltage LOW
delay(1000); // wait for a second
}
Переглядів: 95
Відео
How to Build a Junkbot
Переглядів 375Місяць тому
Junkbots are literally just as the name says - they are robots made from junk! This one is made from a variety of parts including a fuel filter, bike brake levers, bike light and a bunch of other random parts. They aren't hard to make but you will need a good selection of parts to choose from. The trickiest part of the build is working out how everything is joined together. I try and challenge ...
Booklight Inside a Book!
Переглядів 1,5 тис.3 місяці тому
This build uses an old hardback book and turns it into a little booklight! A step by step guide and parts needed to make this booklight can be found in the Instructable link below Instructable www.instructables.com/Book-Light-Inside-a-Book/
CMOS Clock Counter - 4060 IC Build
Переглядів 4774 місяці тому
This CMOS clock counter counts ecactly one second intervals to 99,999 and then resets to zero to start all over again. The circuit is built using 2 4060 IC's, a handful of 4033 IC's and 7 segment LED displays. So why bother building something like this? Well I wanted to create a little reminder for myself that the seconds are always ticking by and there are only 89,400 in each day - so get busy...
Ekoplam - a Dub Siren and Delay/Reverb Synth in one. Little Synths with BIG Sounds #3
Переглядів 1,8 тис.7 місяців тому
Hello all This is number 3 in the "Little Synths With BIG Sounds" builds. You can find the other 2 synths in the links below. This one is a classic, all in one dub siren and delay/reverb synth. You can also use the delay/reverb section separately and plug in other synths to add some richness & depth. It's an easy build and I've included all of the gerber files, schematics etc which you can find...
Proton - Little Synths With BIG Sounds
Переглядів 1,3 тис.8 місяців тому
This is the 2nd build in a series of little synths with big sounds that I'm building. The original design comes from Syntherjack and you can find a link below to he's build. This is a super fun synth to play with and has some amazing rich sounds that can be generated. This is especially surprising considering it's all run off 1 IC and a couple AA batteries! I've also published a step by step gu...
Elements - Little Synths with BIG Sounds
Переглядів 5 тис.9 місяців тому
This is the first in a series of little synths that I'm building. In making this synth I had a few goals I wanted to hit: 1. Make it easy to build and assessable to anyone with a soldering iron. No fancy power supplies or handmade cases 2. Have to be fun to play and have a BIG sound 3. Can be connected externally to other equipement like sequencers You can find all of the gerber files, schemati...
Tetrapod Junkbot Made From Typewriter Parts (mostly!)
Переглядів 724Рік тому
Tetrapod Junkbot Made From Typewriter Parts (mostly!)
Shotgun Shell Light V3
Переглядів 2,3 тис.Рік тому
This is my 3rd version of the shotgun shell lighter. The other 2 can be found in links below. After reading a few improvement suggestions on the vid for version 2, I decided to add these into version 3. The main ones are that the cap that covers the wick is now connected to the lighter so you don't have to un-screw it (or potentially lose it!) The 2nd one is, I have removed the filler section o...
Making Camera Stands From Vintage Film Reels
Переглядів 403Рік тому
Making Camera Stands From Vintage Film Reels
I made a lamp from an old soft drink bottle
Переглядів 971Рік тому
I made a lamp from an old soft drink bottle
Using Old Mobile Batteries to Power Anything (Almost!)
Переглядів 1,3 тис.Рік тому
Using Old Mobile Batteries to Power Anything (Almost!)
Create Pefect Fitting Front Panels For Your PCB's
Переглядів 4312 роки тому
Create Pefect Fitting Front Panels For Your PCB's
Make a Little Mechanical Bug From an Old Vacuum Tube
Переглядів 4,5 тис.2 роки тому
Make a Little Mechanical Bug From an Old Vacuum Tube
81 LED Chaser Built With 2 555 Timers
Переглядів 3,2 тис.2 роки тому
81 LED Chaser Built With 2 555 Timers
How to Make Spudgers (prying tool) Out of Old Cutlery
Переглядів 2,5 тис.2 роки тому
How to Make Spudgers (prying tool) Out of Old Cutlery
The Beatmaster 2000 - Sequencer & Beat Synth
Переглядів 2,5 тис.2 роки тому
The Beatmaster 2000 - Sequencer & Beat Synth
Great idea! I suggest you buy a safe can opener, those that do a lateral cut to seamlessly cut the bottom
Does anyone else see the irony of having to use a Bic lighter to light the torch?
The controls work both ways: you can modify the playback speed AND you can modify the max recording time, however, "longer recording time = more low-fi quality".
I’m just trying to light some candles man 😞
What is that Lava Soap looking stick you used on the titan to polish the copper?
Cool! I’ve been wanting to do this for awhile but have been too lazy to do the research.
Haha. No need to now! I nearly gave up at one stage - all the tutorials I found didn’t work - very frustrating
Very useful. Thanks!
That was awesome. Thanks for putting this together.
Anytime - hope it comes in handy!
Thank heaven that's a pet chicken. ☺️
Dove posso acquistare i pezzi per farlo anche io a casa?
Quero comprar ....rj
Lovely work! Thanks for the video!
When I saw the “power supply” I was expecting LED’s. 😅
Cool i want one
nice
That’s so cool!!
Excelente video gracias
Too slow
Pretty ingenious 👍🏼👍🏼👍🏼👍🏼👍🏼
Stupendo oggetto D.I.Y. Fissa il tappo ad una catenella
Why could'nt the plug end which connects to the PC be replaced with a 1/4" jack for the guitar without doing any other mods? I'm not talking about any power requirements. I know this video was uploaded 8 years ago so I'm hoping you will still respond to this question. Have a good day.
That's dope
hilarious how your videos in the toy blow job section #roasted
Excellent! Thank you very much for sharing it! The sound is incredible.
Too F’ing funny…. My invention idea was ‘The Human Prod’ adjusted to the strongest surge self inflicted to quit bad habits!!!😮😮
Seems simple to make
Crocodile Dundee would have said "Onya Mate - let me just pull out my giant knife here and carve off that rubber like skinning a dingo. A few slices and yeah - Bob’s your uncle"
The best
Hi, love the stuff you do been checking out your new stuff and your older dub siren stuff and think it’s all great I’ve got a question about how it some parts of it work because I can’t for the life of me figure it but in the examples the pitch modulation from essentially the 555 ic configured as an lfo sounds to me as if it’s sometimes a smooth sine like modulation and sometimes the more alternating between two pitches like the square wave it should be emitting do you know why this is?
they are not showing how to make a cone to the rocket ship👎👎👎👎👎👎👎
Awesome! Great idea. Thanks for the video. I found you through Instructables. Quick question. Why did you put the book's pages back into the build?
Hey there, It was to add a little weight tot he lamp. You don’t have to do it but it helps keep it standing up right better
How to did you made this potentiometer please give me video link
I like it.
Very cool! Thank you for sharing the process and fab idea!
Amazing Synth btw! but why not use an external head phone out for this, it would sound so much better!
Yeah in hindsight it would have been good to be able to plug in an external speaker but it was one of the first builds I did and prob didn’t bother to add one.
@@lonesoulsurferIts not too late, I'd love too hear what this baby really sounds like!
if i take the plane they would think its a bomb lmao nice video tho
Haha. I actually made a lighter out of some scrap copper and got stopped at LA airport with it
Damn, thats nice! Do you use Zippo fluid?
Yep - works a treat! I
nice idea, nice also that you used "old" ICs, but it really does NOT do the job, it should have been somehting that syncs to an NTP and shows the day-time counting down in seconds imho :)
How do i make it
thank you very much for plans and also for a very pretty music.
Başarılarının devamını bekliyorum kardeşim
Cool little project, and a good way to remind ourselves that time is indeed slipping away.
👍
Can you make one out of a brass ww1 shotgun shell❓️
Yeah definitely! I didn’t know these existed until recently. You can actually buy the brass shotgun shells if you want to as well
Do you have sound on both speakers, because I am confuse you short the white and red together on one channel...
i love it! May have a look at my broken tubes aswell 😃
oh wow, really impressive, i like your design very much!
But i do like it
Why punch old primer out just to put new old one back in?
thx!
Excellent!!! 🏆🎸🏆